Reset filter Export

___Download Click___	___Part No.___ ______ (勾選方式)	___Features___	___Number of Channels___ ______ (勾選方式)	___Function___ ______ (勾選方式)	___Output Type___ ______ (勾選方式)	Vcc (V) Min (Range)	Vcc (V) Max (Range)	Icc (uA) TYP. (Range)	Icc (uA) Max (Range)	___Detect Voltage (V)___ ___Min___ ______ (勾選方式)	___Detect Voltage (V)___ ___Max___ ______ (勾選方式)	___Accurate(%)___ ______ (勾選方式)	Delay time (mS) Min (Range)	Delay time (mS) Max (Range)	___Package___ ______ (勾選方式)
___81XX___	___81XX___	___Power Reset IC___ ______ ___*High precision voltage detection. (VSS 3% max)___ ___*low current consumption.(ICCH=5μA max. ICCL=5μA max.)___ ___*Low operating threshold voltage (0.65V typ.)___ ___*Hysteresis voltage is provided as a detect voltage.(50mV typ.)___ ___*Large output current at the time ON (15mA typ.)___ ___*The detect voltage can be selected at your discretion at 0.1V step within the range of 1.9V to 4.6V by the following stipulation method.___	___1___	___Low Current Consumption___ ___No Delay time___	___Active Low___ ___Open Drain___	0.85	10	3	5	___1.8___	___5___	___±3.0___	0	0.06	___SOT-23___ ___SOT-25___ ___SOT-23-3___ ___SOT-89___ ___TO-92___
___81CXX_81NXX___	___81CXX___	___CMOS Output Voltage Detectors with Built-in Delay.___ ___Built-in Delay Time:1ms ~ 50ms &50 ~ 200 ms& 200ms ~ 400ms___ ______ ___* Highly Accurate: Detect voltage ± 2%___ ___* Built-In Delay time : 1ms ~ 50ms___ ___50ms ~ 200ms___ ___200ms ~ 400ms___ ___* Detect Voltage Temperature / Characteristics: TYP± 100ppm/°C___ ___* Wide Operating Voltage Range : 0.7V ~ 10.0V___ ___* Low Current Consumption : TYP 1.0μA (VIN=2.0V)___	___1___	___Low Current Consumption___ ___Built-In Delay time___	___Active Low___ ___Push Pull___	0.7	10	2	4.2	___1___	___5___	___±2.0___	1	400	___SOT-23___ ___SOT-89___ ___SOT-323___ ___TO-92___ ___SOT-223___ ___SOT-23-3___
___81CXX_81NXX___	___81NXX___	___Nch Open Drain Voltage Detectors with Built-in Delay.___ ___Built-in Delay Time:1ms ~ 50ms &50 ~ 200 ms& 200ms ~ 400ms___ ______ ___* Highly Accurate: Detect voltage ± 2%___ ___* Built-In Delay time : 1ms ~ 50ms___ ___50ms ~ 200ms___ ___200ms ~ 400ms___ ___* Detect Voltage Temperature / Characteristics: TYP± 100ppm/°C___ ___* Wide Operating Voltage Range : 0.7V ~ 10.0V___ ___* Low Current Consumption : TYP 1.0μA (VIN=2.0V)___	___1___	___Low Current Consumption___ ___Built-In Delay time___	___Active Low___ ___Open Drain___	0.7	10	2	4.2	___1___	___5___	___±2.0___	1	400	___SOT-23___ ___SOT-89___ ___SOT-323___ ___TO-92___ ___SOT-223___ ___SOT-23-3___
___82XX___	___82XX___	___Voltage Detection and System Reset IC with Manual Reset Function.___ ___Built-in Delay Time:30~75ms;60~150ms;120~300ms;240ms ~600ms;480~1200ms___ ______ ___* Internal Fixed Delay Time Setting by Counter Timer___ ___* Grate Delay Time Temperature Characteristics:±800ppm/°C___ ___* Operating Limit Voltage as 0.65V(Typ.)___ ___* Hysteresis Voltage Provided: 50mV(Typ.)___ ___* Circuit Current While On ICCL=300μA(Typ.)___ ___* Circuit Current While Off ICCH=200μA(Typ.)___	___1___	___Built-In Delay time___	___Active Low___ ___Open Drain___	0.85	10	-	0.6	___2.5___	___2.93___	___±0.15___	30	1200	___SOT-25___
___82CXX___	___82CXX___	___CMOS Output Voltage Detectors.___ ______ ___*High-accuracy detection voltage : ±2%___ ___*Detect voltage range : 1.3V to 6.2V in 0.1V increments___ ___*Detect voltage temperature characteristics: TYP. ±100ppm/°С.___ ___*Wide operating voltage range : 0.7V to 10.0V___ ___*Low current consumption : TYP 0.7μA(at VIN=1.5V)___	___1___	___Low Current Consumption___ ___No Delay time___	___Active Low___ ___Push Pull___	0.7	10	1.1	3.6	___1.3___	___6.2___	___±2.0___	0	0.2	___SOT-25___ ___SOT-23___ ___SOT-23-3___ ___SOT-89___ ___TO-92___
___82NXX___	___82NXX___	___N-ch Open Drain Output Voltage Detectors.___ ______ ___* High-accuracy detection voltage : ±2%___ ___* Detect voltage range : 1.3V to 6.0V in 0.1V increments___ ___* Detect voltage temperature characteristics: TYP.±100ppm/C.___ ___* Wide operating voltage range : 0.7V to 10.0V___ ___* Low current consumption : TYP 0.7μA (at VIN=1.5V)___	___1___	___Low Current Consumption___ ___No Delay time___	___Active Low___ ___Open Drain___	0.7	10	1.3	4	___1.3___	___6___	___±2.0___	0	0.2	___SOT-23___ ___SOT-23-3___ ___SOT-25___ ___SOT-343___ ___SOT-89___ ___TO-92___ ___SOT-353___
___84NXX___	___84NXX___	___Low Quiescent Current Programmable-Delay Supervisory Circuit.___ ______ ___* Standard Voltage Rails From 0.9V to 5V and Adjustable___ ___Voltage From 0.4V are Available___ ___* Low Quiescent Current: 1.6uA (typ.)___ ___* Delay Time: 2.1ms to 10s___ ___* High Threshold Accuracy: ±1% (typ.)___ ___* Manual Reset (MR) Input___ ___* Open-Drain RESET Output___ ___* Immune to Short Negative SENSE voltage___ ___* Guaranteed Reset Valid to VCC: 0.8V___	___1___	___Low Current Consumption___ ___Sense Function___ ___Manual reset input___ ___Adjustable delay Time___	___Active Low___ ___Open Drain___	1.8	6	-	12	___ADJ___	___ADJ___	___±2.0___	15	530	___SOT-23-6___
___86N1C___	___86N1C___	___Voltage Detecting, System Restting IC.___ ______ ___* Few external parts___ ___* Low threshold operating voltage (Supply voltage to keep low-state___ ___at low supply voltage): 0.6V (Typ) at RL=22kΩ___ ___* Large delay time with a capacitor of small capacitance___ ___* Wide application range___ ___* Wide supply voltage range: 2V~17V___	___1___	___Wide supply voltage___ ___Adjustable delay Time___	___Active Low___ ___Open Drain___	2	17	270	540	___1.25___	___1.25___	___±4.0___	1.6	7	___SOP-8___
___88CXX___	___88CXX___	___CMOS Output High-Precision Voltage Detectors with Delay Controlled by External Capacitor.___ ______ ___* Highly accurate : 2.0%___ ___* Hysteresis characteristics: 5% typ.___ ___* Ultra-low current consumption: 1.0μA typ. (VDD=2.0V)___ ___* Detection voltage ranges: 2.0~4.5V and step by 0.1V.___ ___* Low operating voltage based on detection voltage___ ___* Delay time setting by an additional external capacitor___	___1___	___Low Current Consumption___ ___Adjustable delay Time___	___Active Low___ ___Push Pull___	0.95	10	1.2	5	___1.8___	___4.5___	___±2.0___	0.1	10000	___SOT-23-5___ ___SOT-25___
___88NXX___	___88NXX___	___Nch Open Drain High-Precision Voltage Detectors with Delay Controlled by External Capacitor.___ ______ ___* ± 2.0 % Accuracy Detection Voltage___ ___* Hysteresis Characteristics: 5% TYP___ ___* Detection Voltage varies from 2.0V to 4.5V with 0.1V step___ ___* Output Forms: N-ch open-drain output (when it is in Active-Low)___	___1___	___Low Current Consumption___ ___Adjustable delay Time___	___Active Low___ ___Open Drain___	0.95	10	-	5	___1.8___	___4.5___	___±2.0___	0.1	10000	___SOT-25___ ___SOT-23-5___ ___SOT-23-3___ ___SOT-143___
___89CXX_89NXX___	___89CXX/89NXX___	___Low Voltage Free Delay Time Setring Voltage Detector IC Series.___ ______ ___* Adjustable delay Time___ ___* N-ch open drain and CMOS output selectable___ ___* Ultra-low current consumption___ ___* Wide operating temperature range___	___1___	___Ultra-low current consumption___ ___Adjustable delay Time___	___Active Low___ ___Open Drain___ ___Push Pull___	0.9	7	-	2.28	___0.9___	___4.8___	___±1.0___	0.1	10000	___SOT-23-5___ ___SOT-343___ ___SOT-25___
___UIC809___	___UIC809___	___Microprocessor Reset Circuits.___ ______ ___* Voltage monitor for 3V or 3.3V or 5V power supplies___ ___* Valid RESET remains with VCC as low as 1V___ ___* Typical supply current: 5μA___ ___* Fixed 140ms minimum reset pulse width___ ___* With Manual reset input___	___1___	___Low Current Consumption___ ___Built-In Delay time___	___Active Low___ ___Push Pull___	1	6	-	10	___2.93___	___2.93___	___-___	140	560	___SOT-23-3___
___UIC811___	___UIC811___	___Microprocessor Reset Circuits Include Manual Reset.___ ___Built-in Delay Time: 140~560ms; Reset Out With Active Low___ ______ ___* Voltage monitor for 3V or 3.3V or 5V power supplies___ ___* Valid RESET remains with VCC as low as 1V___ ___* Typical supply current: 5μA___ ___* Fixed 140ms minimum reset pulse width___ ___* With Manual reset input___	___1___	___Low Current Consumption___ ___Built-In Delay time___ ___Manual reset input___	___Active Low___ ___Push Pull___	1	6	-	25	___2.25___	___5___	___±2.5___	140	560	___SOT-23___ ___SOT-25___ ___SOT-23-3___ ___SOT-143___ ___SOT-343___ ___SOT-353___
___UIC812___	___UIC812___	___4-PIN μP Voltage Monitors With Manual Reset Input.___ ______ ___* Precision Monitoring of +3V, +3.3V, and +5V Power-Supply Voltages___ ___* Available in Three Output Configurations Open-Drain RESET Output___ ___* Typical supply current: 5μA___ ___* 140 mS Min Power-On Reset Pulse Width___ ___* Guaranteed Reset Valid to VCC=+1V___ ___* Power Supply Transient Immunity___ ___* Manual Reset Input___ ___* 2% Threshold Accuracy___	___1___	___Low Current Consumption___ ___Built-In Delay time___ ___Manual reset input___	___Active Low___ ___Open Drain___	1	5.5	-	20	___2.25___	___5___	___±2.5___	140	560	___SOT-23___ ___SOT-25___ ___SOT-23-3___ ___SOT-143___ ___SOT-343___ ___SOT-353___
___UIC813___	___UIC813___	___3-PIN Microprocessor Reset Circuits.___ ______ ___* Voltage monitor for 3V or 3.3V or 5V power supplies___ ___* Valid RESET remains with VCC as low as 1V___ ___* Typical supply current: 10μA___ ___* Fixed 140ms minimum reset pulse width___ ___* Push-Pull Reset Active High Optput.___	___1___	___Low Current Consumption___ ___Built-In Delay time___	___Active High___ ___Push Pull___	1	5.5	-	30	___2.63___	___4.63___	___±2.0___	140	560	___SOT-23___ ___SOT-143___
___UWD706___	___UWD706___	___Microprocessor UP Watch Dog Timer.___ ______ ___* Precision supply- Voltage Monitor___ ___* Valid RESETremains with VCC as low as 1V___ ___* 200ms Reset Pulse Width___ ___* Independent Watchdog Timer (1.6sec) Timeout___ ___* Voltage Monitor for Power-Fail or Low-Battery Warning___ ___* With Manual reset input___	___1___	___Built-In Delay time___ ___Watchdog Function___ ___Power-Fail___ ___Manual reset input___	___Active Low___ ___Push Pull___	1	5.5	50	250	___2.63___	___4.65___	___-___	110	300	___SOP-8___
___UWD708___	___UWD708___	___Low Cost Microprocessor Supervisory Circuits.___ ______ ___* Precision supply- Voltage Monitor___ ___* Valid RESET remains with VCC as low as 1V___ ___* 200ms Reset Pulse Width___ ___* Voltage Monitor for Power-Fail or Low-Battery Warning___ ___* With Manual reset input___	___2___	___Built-In Delay time___ ___Daul Output___ ___Power-Fail___ ___Manual reset input___	___Active High/Low___ ___Push Pull___	1.0	5.5	50	150	___2.93___	___4.4___	___-___	110	300	___SOP-8___
___UWD813___	___UWD813___	___* Precision supply- Voltage Monitor___ ___* Valid RESET remains with VCC as low as 1V___ ___* 200ms Reset Pulse Width___ ___* Independent Watchdog Timer (1.9sec) Timeout___ ___* Voltage Monitor for Power-Fail or Low-Battery Warning___ ___* With Manual reset input___	___1___	___Built-In Delay time___ ___Watchdog Function___ ___Power-Fail___ ___Manual reset input___	___Active high___ ___Push-Pull___	1	5.5	150	350	___4.63___	___4.63___	___-___	150	300	___SOP-8___
___UWD817___	___UWD817___	___Microprocessor UP Watch Dog Timer.___ ______ ___* Precision Supply-Voltage Monitor___ ___* Operating Voltage Range: 1.0V~6.0V___ ___* Output Configuration: CMOS___ ___* Watchdog Function: Watchdog input WD___ ___* Wide Temperature Range: -40°C to +85°C___	___1___	___Built-In Delay time___ ___Watchdog Function___ ___Manual reset input___	___Active Low___ ___Push Pull___	1.0	5.5	-	50	___2.63___	___4.65___	___±2.0___	140	280	___SOT-25___
___3510___	___3510___	___OVPx3 + UVPx2 + PGO + PSON + FPO___ ___* OVP/OVLO for 3.3V, 5V, VDD.___ ___* UVP/UVLO for 3.3V, 5V.___ ___* Open-drain Output for PGO and FPO pin.___ ___* 300ms PGO delay.___ ___* 75ms delay for 3.3V/5V SCP.___ ___* 2.3ms PSON control to FPO turn-off delay.___ ___* 38ms PSON control de-bounce.___ ___* 73us width OVP/UVP noise deglitches.___	___2___	___OVP/OVLO___ ___UVP/UVLO___	___Open Drain___	4	15	-	1000	___3.3___	___5___	___±5.0___	200	450	___DIP-8___ ___SOP-8___
___3511___	___3511___	___OVPx3 + UVPx2 + PGO + PDON_N + FPL_N___ ___* OVP/OVLO for 3.3V, 5V, VDD.___ ___* UVP/UVLO for 3.3V, 5V.___ ___* Open-drain Output for PGO and FPL_N.___ ___* 300ms PGO delay.___ ___* 75ms delay for 3.3V/5V SCP.___ ___* 2.4ms PDON_N control to FPL_N turn-off delay.___ ___* 38ms PDON_N control de-bounce.___ ___* 73us width OVP/UVP noise deglitches.___	___2___	___OVP/OVLO___ ___UVP/UVLO___	___Open Drain___	3.8	15	-	1000	___3.3___	___5___	___±5.0___	200	490	___DIP-8___ ___SOP-8___
___3513___	___3513___	___OVPx4 + OCPx4 + UVPx4 + PGO + PSONB + FPOB + OTP___ ___* OVP/OVLO for 3.3V, 5V, 12V.___ ___* UVP/UVLO for 3.3V, 5V, 12V.___ ___* OCP monitors for 3.3V, 5V, 12V output current.___ ___* Open-drain Output for PGO and FPOB.___ ___* 300ms PGO delay.___ ___* 75ms(PGI>1.2V)/300ms(PGI<1.2V) delay for 3.3V, 5V, 12V SCP.___ ___* 2.4ms PSONB control to FPOB turn-off delay.___ ___* 38ms PSONB control de-bounce.___ ___* 73us width OVP/UVP noise deglitches.___	___3___	___OVP/OVLO___ ___UVP/UVLO___ ___OCP monitors___	___Open Drain___	4	15	-	1000	___3.3___	___12___	___±5.0___	200	490	___DIP-16___ ___SOP-16___
___3520___	___3520___	___OVPx4 + UVPx3 + PG + REM___ ___* Complete PWM Control and Protection Circuitry.___ ___* OVP/OVLO for 3.3V, 5V, 12V, PT.___ ___* UVP/UVLO for 3.3V, 5V, 12V.___ ___* Open-drain Output for PG.___ ___* Open-drain PWM Control Output for C1, C2.___ ___* 36ms REM Control de–bounce.___ ___* 280ms delay for 3.3V, 5V, 12V SCP.___ ___* 280ms PG delay.___ ___* Built-in Soft-start function.___	___4___	___OVP/OVLO___ ___UVP/UVLO___	___Open Drain___	3	5.5	10000	20000	___3.3___	___12___	___±5.0___	150	350	___DIP-16___
___3521___	___3521___	___OVPx4 + UVPx3 + PG + REM___ ___* Complete PWM Control and Protection Circuitry.___ ___* OVP/OVLO for 3.3V, 5V, 12V, PT.___ ___* UVP/UVLO for 3.3V, 5V, 12V.___ ___* Open-drain Output for PG.___ ___* Open-drain PWM Control Output for C1, C2.___ ___* 36ms REM Control de-bounce.___ ___* 250ms delay for 3.3V, 5V, 12V SCP.___ ___* PG delay time, set by TPG external CAP.___	___4___	___OVP/OVLO___ ___UVP/UVLO___	___Open Drain___	3	5.5	10000	20000	___3.3___	___12___	___±5.0___	100	500	___DIP-16___
___S3515___	___S3515___	___OVPx4 + OCPx3 + UVPx4 + PGO + PSON + FPO___ ___* OVP/OVLO for 3.3V, 5V, 12V, 12VB.___ ___* UVP/UVLO for 3.3V, 5V, 12V, 12VB.___ ___* OCP monitors for 3.3V, 5V, and 12V/12VB output current.___ ___* Open-drain Output for PGO and FPO.___ ___* 300ms PGO delay.___ ___* 75ms delay for 3.3V, 5V, 12V, 12VB SCP.___ ___* 2.8ms PSON control to FPO turn-off delay.___ ___* 38ms PSON control de-Bounce.___ ___* 73uS width OVP/UVP/OCP noise deglitches.___	___4___	___OVP/OVLO___ ___UVP/UVLO___ ___OCP monitors___	___Open Drain___	4	15	1.8	200	___3.3___	___12___	___±5.0___	200	450	___DIP-14___ ___SOP-14___
___S3525___	___S3525___	___OVPx4 + OCPx3 + UVPx4 + PGO + PSONB + FPOB___ ___* OVP/OVLO for 3.3V, 5V, 12VA, 12VB.___ ___* UVP/UVLO for 3.3V, 5V, 12VA, 12VB.___ ___* OCP monitors 3.3V, 5V, 12VA, 12VB output current.___ ___* Open-drain Output for PGO, FPOB.___ ___* 225ms PGO delay.___ ___* 75ms(PGI>1.2V)/300ms(PGI<1.2V) delay for 3.3V, 5V, 12VA, 12VB SCP.___ ___* 2.4ms PSONB control to FPOB turn-off delay.___ ___* 38ms PSONB control de-bounce.___ ___* 73us width OVP/UVP/OCP noise deglitches.___	___4___	___OVP/OVLO___ ___UVP/UVLO___ ___OCP monitors___	___Open Drain___	4	15	-	1000	___3.3___	___12___	___±5.0___	200	490	___DIP-14___ ___SOP-14___
___S3526___	___S3526___	___3-CHANNEL SECONDARY SUPERVISOR___ ______ ___* Over/Under-voltage protection___ ___* Over-current protection___ ___* Additional protection input___ ___* Fault protection output with open drain output stage___ ___* Open drain power good output signal for power good input___ ___* 300ms power good delay___ ___* 75ms delay for UV/OC protection___ ___* 38ms PSON control de-bounce___ ___* Wide power supply range (3.8V~16V)___ ___* Special care for AC power off___	___3___	___OVP/OVLO___ ___UVP/UVLO___ ___OCP monitors___	___Open Drain___	3.8	16	4500	6000	___-___	___12___	___-___	200	400	___DIP-14___ ___SOP-14___
___S3527___	___S3527___	___OVPx5 + OCPx4 +UVPx4 + PGO + PSONB + FPOB___ ___* OVP/OVLO VX, 3.3V, 5V, 12VA, V12B.___ ___* UVP/UVLO 3.3V, 5V, 12VA and 12VB.___ ___* OCP monitors 3.3V, 5V, 12VA, 12VB output current.___ ___* Open-drain Output for PGO, FPOB.___ ___* 300ms PGO delay.___ ___* 75ms(PGI>12V)/600ms(PGI<12V) delay for SCP/OCP.___ ___* 4ms PSONB control to FPOB turn-off delay.___ ___* 38ms PSONB control de–bounce.___ ___* 14us width OVP noise deglitch.___ ___* 1ms width UVP noise deglitch.___	___4___	___OVP/OVLO___ ___UVP/UVLO___ ___OCP monitors___	___Open Drain___	3.8	16	1	200	___3.3___	___12___	___±5.0___	100	400	___DIP-16___ ___SOP-16___
___83NXX___	___83NXX___	___Low-current, ultrasmall, push-button reset timers.___ ______ ___* Single or Dual Push-Button Inputs___ ___* Low Supply Current: 400nA___ ___* Two-State Logic, User-Selectable Input Delay:(7.5s and 0s)___ ___* Multiple Timing Options Available___ ___* Fixed Time-out Pulse at : 400ms___ ___* Active Low, Open-Drain Output___	___1___	___Low Current Consumption___ ___Built-In Delay time___	___Active Low___ ___Push Pull___	1.6	6.5	0.4	3.4	___2___	___2.2___	___-___	0	12500	___DFN1616-6___
___UTL7712___	___UTL7712___	___* Power-On Reset Generator___ ___* Automatic Reset Generation After Voltage Drop___ ___* Wide Supply-Voltage Range___ ___* Precision Voltage Sensor___ ___* Externally Adjustable Pulse Duration___	___2___	___Externally Adjustable Pulse Duration___	___Push Pull___	3.5	18	1.8	3	___10.9___	___10.95___	___±2.0___	0	-	___SOP-8___ ___DIP-8___
___UIC811Q___	___UIC811Q___	___Microprocessor Reset Circuits Include Manual Reset.___ ___Built-in Delay Time: 140~560ms; Reset Out With Active Low___ ______ ___* Voltage monitor for 3V or 3.3V or 5V power supplies___ ___* Valid RESET remains with VCC as low as 1V___ ___* Typical supply current: 5μA___ ___* Fixed 140ms minimum reset pulse width___ ___* With Manual reset input___	___1___	___Low Current Consumption___ ___Built-In Delay time___ ___Manual reset input___	___Active Low___ ___Push Pull___	1	6	-	25	___2.25___	___5___	___±2.5___	140	560	___SOT-23___ ___SOT-25___ ___SOT-23-3___ ___SOT-143___ ___SOT-323___ ___SOT-343___ ___SOT-353___ ___X2DFN1010-4___
___UIC812Q___	___UIC812Q___	___4-PIN μP Voltage Monitors With Manual Reset Input.___ ______ ___* Precision Monitoring of +3V, +3.3V, and +5V Power-Supply Voltages___ ___* Available in Three Output Configurations Open-Drain RESET Output___ ___* Typical supply current: 5μA___ ___* 140 mS Min Power-On Reset Pulse Width___ ___* Guaranteed Reset Valid to VCC=+1V___ ___* Power Supply Transient Immunity___ ___* Manual Reset Input___ ___* 2% Threshold Accuracy___	___1___	___Low Current Consumption___ ___Built-In Delay time___ ___Manual reset input___	___Active Low___ ___Open Drain___	1	5.5	-	20	___2.25___	___5___	___±2.5___	140	560	___SOT-23___ ___SOT-25___ ___SOT-23-3___ ___SOT-143___ ___SOT-323___ ___SOT-343___ ___SOT-353___ ___X2DFN1010-4___
___80NXX___	___80NXX___	___Three terminal low power voltage detectors implemented in CMOS.___ ______ ___* Low power consumption___ ___* Low temperature coefficient___ ___* High input voltage range (up to 30V)___ ___* Output voltage accuracy: tolerance ±3%___ ___* Built-in hysteresis characteristic___	___1___	___Wide supply voltage___	___Active Low___ ___Open Drain___	1.5	30	3	6	___2.2___	___5___	___±3.0___	-	-	___SOT-89___
___UIC832___	___UIC832___	___* Operating Voltage Range (Maximum Rating): 1.65V ~ 5.5V (6V)___ ___* Supply Current 1 (at standby): Typ. 0.55μA (VDD = 5.5V)___ ___* Supply Current 2 (at active before reset signal output):___ ___Typ. 1.2μA　 (VDD = 5.5V)___ ___* Supply Current 3 (at active after reset signal output): Typ. 0.15μA___ ___(VDD = 5.5V)___ ___* Operating Temperature Range: -40 ~+85°C___ ___* Output Delay Time(UIC832X-Q): Typ. 7.5s___ ___(UIC832B-R): Typ. 10s___ ___(UIC832X-T): Typ. 3.0s___ ___* Output Delay Time Accuracy: ±10%___ ___* Output Release Time (UIC832X-Q): Typ. 0.234s___ ___(UIC832B-R): Typ. 0.313s___ ___(UIC832X-T): Typ. 0.1875s___ ___* Output Release Time Accuracy: ±10%___ ___* Output Type (UIC832A): N-Channel Open Drain___ ___(UIC832B): N-Channel Open Drain and CMOS___	___1___	___Built-In Delay time___ ___Manual reset input___	___Active Low/high___ ___Push Pull/ Open Drain___	1.65	5.5	1.2	6.5	___0.3___	___0.85___	___-___	2.6	11.5	___DFN2020-8___